跳转到主要内容
Chinese, Simplified

数据中心结构管理和自动化

建立数据中心没有单一的方法。同样,没有单一的方法来管理数据中心结构。Cisco、第三方和开源社区提供了许多不同的工具,可用于监视、管理、自动化和排除数据中心结构的故障。

思科数据中心网络管理器

Cisco Data Center Network Manager(DCNM)是Cisco®统一结构的管理系统。它使您能够配置、监视和排除数据中心网络基础架构的故障。Cisco DCNM可以以四种模式安装:

  • 经典LAN模式:管理部署在传统设计中的Cisco Nexus数据中心基础设施,如vPC设计、FabricPath设计等。它提供实时运行状况摘要、警报、可见性信息等。
  • 媒体控制器模式:为媒体解决方案管理Cisco IP结构网络,并帮助从SDI路由器过渡到基于IP的基础设施。它提供工作流自动化、流策略管理和第三方工作室设备集成等(此模式与本白皮书无关)
  • 存储区域网络(SAN)控制器模式:管理Cisco MDS系列交换机以进行存储网络部署,并对所有SAN管理功能进行图形控制。它提供丰富的洞察遥测信息和其他高级分析信息等(此模式与本白皮书无关)
  • LAN结构模式:提供结构生成器,用于自动VXLAN EVPN结构底层部署、覆盖部署、端到端流跟踪、报警和故障排除、配置符合性和设备生命周期管理等。

Cisco DCNM 11.2版支持Cisco Network Insights应用程序;这些应用程序由可添加到数据中心网络管理器(DCNM)的监视实用程序组成。支持两个Cisco Network Insights应用程序:

  • Cisco网络洞察-顾问(NIA):监控数据中心网络并确定可以解决的问题,以保持可用性并减少意外停机。NIA不断扫描客户的网络,并提供前瞻性建议,重点是维护可用性,并提醒客户可能影响正常运行时间的潜在问题。
  • Cisco Network Insights–Resources(NIR):提供一种通过数据收集收集信息的方法,以获得整个数据中心网络管理器(DCNM)中可用资源及其活动流程和配置的概述。

有关Cisco DCNM的更多信息,请参阅https://www.cisco.com/c/en/us/products/cloud-systems-management/prime-d…

有关Cisco Network Insights的更多信息,请参阅https://www.cisco.com/c/en/us/support/data-center-analytics/network-ins…

 

结论

本文档介绍了Cisco的几种spine和leaf架构设计,包括编写本文档时每个架构最重要的技术组件和设计考虑事项。

Cisco FabricPath spine and leaf网络是Cisco的专有网络。它简单、灵活、稳定,具有良好的可扩展性和快速收敛性,支持第二层多条并行路径。但是FabricPath网络是一种基于洪水和学习的第二层技术。其控制平面协议为FabricPath is-is,用于确定FabricPath交换机ID可达性信息。FabricPath交换机依靠初始数据平面流量洪泛来学习终端主机可达性信息。随着广播域中主机数量的增加,泛洪数据包的负面影响变得更加明显。第三层路由功能位于第二层网络之上。常见的第3层设计使用集中路由:即第3层路由功能集中在特定交换机(脊椎交换机或边界叶交换机)上。FabricPath网络支持多达四个用于内部VLAN路由的选播网关。

Cisco VXLAN flood and learn spine and leaf网络符合IETF VXLAN标准(RFC 7348)。它通过第3层IP底层网络传输第2层帧。但它仍然是一种基于洪水和学习的第二层技术。随着广播域中主机数量的增加,它将面临与FabricPath spine和leaf网络相同的泛洪挑战。第三层路由功能位于第二层网络之上。常见的第3层设计使用集中路由:即第3层路由功能集中在特定交换机(脊椎交换机或边界叶交换机)上。VXLAN flood and learn spine和leaf网络最多支持两个活动网关和vPC,用于内部VXLAN路由。

Cisco VXLAN MP-BGP EVPN spine and leaf架构使用MP-BGP EVPN作为VXLAN的控制平面。它符合IETF VXLAN标准RFC 7348和RFC8365(先前起草的IETF-bess-evpn覆盖)。它为VXLAN覆盖网络中的第2层和第3层转发提供控制平面和数据平面分离以及统一的控制平面。第3层内部路由通信量通过每个ToR交换机上的分布式选播网关以横向扩展的方式直接路由。VXLAN MP-BGP EVPN spine and leaf架构具有以下主要优点:

  • MP-BGP EVPN协议基于行业标准,允许多供应商互操作。
  • 它使终端主机第2层和第3层可达性信息的控制平面学习成为可能,使组织能够建立更健壮和可扩展的VXLAN覆盖网络。
  • 它使用已有十年历史的MP-BGP VPN技术来支持可扩展的多租户VXLAN覆盖网络。
  • EVPN地址族携带第2层和第3层可达性信息,从而在VXLAN覆盖网络中提供集成桥接和路由。
  • 通过基于协议的主机MAC地址IP地址路由分配和本地VTEP上的ARP抑制,减少网络洪泛。
  • ●通过每个ToR交换机上的分布式选播功能,为东西和南北交通提供最佳转发,并支持工作负载移动性。
  • 它提供VTEP对等发现和认证,降低VXLAN覆盖网络中恶意VTEP的风险。
  • 它提供了在第2层建立主动-主动多址的机制。
  • 其底层和覆盖管理工具提供许多网络管理功能,简化工作负载可见性,优化故障排除,自动化结构组件供应,自动化覆盖租户网络供应等。

Cisco VXLAN MP-BGP EVPN spine and leaf架构是Cisco的最新创新之一。它旨在简化、优化和自动化现代多租户数据中心结构环境。

 

Cisco脊椎和叶子第2层和第3层结构的比较

表5比较了本文中讨论的四种Cisco spine和leaf架构:FabricPath、VXLAN flood和learn、VXLAN MP-BGP EVPN和MSDC Layer 3网络。请仔细阅读此表和本文档的每个部分,并阅读参考文档以获取更多信息,帮助您选择最适合您的数据中心环境的技术。

表5. Cisco脊椎和叶子第2层和第3层结构的比较

注:自2019年7月起更新

Cisco Spine-and-Leaf Layer 2 and Layer 3 Fabric

Cisco FabricPath

Cisco VXLAN Flood and Learn

Cisco VXLAN MP-BGP EVPN

Cisco MSDC Layer 3

Transport medium requirement

Layer 1

Layer 3

Layer 3

Layer 3

Encapsulation

FabricPath (MAC-in-MAC frame encapsulation)

VXLAN (MAC-in-IP packet encapsulation)

VXLAN (MAC-in-IP packet encapsulation)

Unique node identifier

FabricPath switch ID

VTEP

VTEP

Layer 3 IP address or loopback address

End-host detection

Flood and learn

Flood and learn

Localized flood and learn with ARP suppression

None (localized IP subnet)

Silent host discovery

Yes

Yes

Yes

No

End-host reachability and distribution

Flood and learn plus conversational learning

Flood and learn

MP-BGP EVPN

Unicast routing protocol (eBGP)

Broadcast and unknown unicast traffic

Flood by FabricPath IS-IS multidestination tree

Forwarded by underlay PIM or ingress replication

(Note: Ingress-replication is supported only on Cisco Nexus 9000 Series Switches.)

Forwarded by underlay PIM or

ingress replication

(Note: Ingress replication is supported only on Cisco Nexus 9000 Series Switches.)

Stops at leaf ToR switch

Underlay control plane

FabricPath IS-IS

Any unicast routing protocol (static, OSPF, IS-IS, eBGP, etc.)

Any unicast routing protocol (static, OSPF, IS-IS, eBGP, etc.)

Unicast routing protocol (eBGP)

Overlay control plane

MP-BGP EVPN

Layer 3 gateway

●  Internal and external routing at border spine

●  Internal and external routing at border leaf

●  Up to 4 FabricPath anycast gateways supported

●  Internal and external routing at spine VTEP

●  Internal and external routing at border leaf VTEP

●  Up to 2 active-active gateways with vPC supported

●  Distributed anycast gateway on leaf ToR switch for inter-VXLAN routing

●  Border leaf switch for external routing

(Note: The spine switch only needs to run BGP-EVPN control plane and IP routing.)

●      Border spine switch for external routing

(Note: The spine switch needs to support VXLAN routing on hardware.)

●  Leaf ToR switch for internal routing

●  Border leaf switch for external routing

Layer 2 VXLAN gateway

Leaf ToR switch

Leaf ToR switch

Multicast traffic

Supports:

●  Layer 2 multicast traffic (forwarded by multidestination tree)

●  Layer 3 IP multicast traffic (forwarded by Layer 3 PIM)

Supports:

●  Layer 2 multicast traffic (forwarded by underlay PIM)

●  Layer 3 IP multicast traffic (forwarded by Layer 3 PIM)

Supports:

●  Layer 2 multicast traffic (forwarded by underlay PIM or ingress replication

(Note: Ingress-replication is supported only on Cisco Nexus 9000 Series Switches.)

●  Layer 3 IP multicast traffic (forwarded by Layer 3 PIM-based multicast routing on external router or Tenant Routed Multicast (TRM)).

(Note: TRM is supported on Cisco Nexus 9000 Cloud Scale Series Switches)

Supports:

●  Layer 3 IP multicast traffic

Multi-tenancy

●  Layer 2 multitenancy with VN-segment

●  Layer 3 multitenancy with VRF-lite

●  Layer 2 multitenancy with VNI

●  Layer 3 multitenancy with VRF-lite

●  Support for both Layer 2 multitenancy and Layer 3 multitenancy

No

Standard reference

TRILL-based (Cisco proprietary)

RFC 7348

RFC 7348 and RFC8365 (previously draft-ietf-bess-evpn-overlay)

Routing protocol

Supported hardware

●  Cisco Nexus 7000 Series Switches including the Cisco Nexus 7700 platform switches

●  Cisco Nexus 5500 and 5600 platform switches

●  Cisco Nexus 6000 Series Switches

●  Cisco Nexus 7000 Series Switches including the Cisco Nexus 7700 platform switches

●  Cisco Nexus 9000 Series Switches

●  Cisco Nexus 7000 Series Switches including the Cisco Nexus 7700 platform switches

●  Cisco Nexus 9000 Series Switches

●  Cisco Nexus 7000 Series Switches including the Cisco Nexus 7700 platform switches

●  Cisco Nexus 3000 Series Switches

●  Cisco Nexus 9000 Series Switches

For more information

For additional information, see the following references:

●      Data center overlay technologies: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-730116.html

●      VXLAN network with MP-BGP EVPN control plane: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-734107.html

●      Cisco Massively Scalable Data Center white paper: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-743245.html

●      XLAN EVPN TRM blog:
https://blogs.cisco.com/datacenter/vxlan-innovations-on-the-nexus-os-part-1-of-2

 

 

原文:https://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/white-paper-c11-737022.html#Conclusion

本文:http://jiagoushi.pro/node/1038

讨论:请加入知识星球【首席架构师圈】或者微信小号【intelligenttimes】

Tags
 
Article
知识星球
 
微信公众号
 
视频号